DIY Tools

  • Klein K11095 Wire Stripper: My Go-To Tool for 20 Years

    ByMike Izzo

    I’ve been carrying the Klein K11095 in my tool bag since 2004, and I’m still using the same pair. That should tell you something right there. This isn’t some fancy tool that impresses the apprentices-it’s the one I reach for on every single job because it just works. The wire stripping is clean, the cuts are precise, and after two decades of daily use in attics, crawl spaces, and behind air handlers, it still feels solid in my hand. I’ve watched cheaper strippers fall apart in months, but this Klein keeps delivering. Made in the USA means something when you’re counting on a tool to perform in the field. If you’re serious about HVAC work, this is the wire stripper you buy once and never think about again.

  • Klein 9-in-1 Nut Driver: My Honest Field Review

    BySteve

    I’ve been running Klein’s 9-in-1 nut driver on service calls for the past six months, and it’s earned a permanent spot in my bag. This isn’t just another multi-tool gimmick—it’s actually thought out for how we work in the field. The pass-through design means I can finally run those long condenser bolts all the way through without switching tools three times. Sizes from 3/16″ to 3/4″ cover about 90% of what I hit on residential units.

    The cushion grip holds up better than I expected, even after getting soaked in coil cleaner and oil. My only gripe? The barrel can get loose after heavy use, but a quick tighten fixes it. For the price point, this tool eliminates a lot of fumbling around in tight spaces. It’s not perfect, but it’s proven itself where it counts.

  • Klein Tools 32910: My Go-To Impact Socket Set

    BySteve

    After ten years in the field, I’ve learned that most multi-bit tools are either too flimsy for real work or too bulky to carry around. The Klein Tools 32910 breaks that pattern. This 7-in-1 impact socket set has become the first tool I grab when I’m working on condensers or air handlers. The flip socket design gives me quick access to the six most common nut driver sizes without fumbling through a bag, and the impact-rated construction actually holds up when I need to break loose seized fasteners. What really sold me is the handle — it’s got enough length for proper torque without being awkward in tight spaces. At under forty bucks, it’s replaced at least three separate tools in my service bag. If you’re tired of carrying a socket set that rattles around and never has the right size when you need it, this is worth checking out.

  • Klein Tools 935AB4V: My Go-To Torpedo Level

    ByMike Izzo

    After running through countless torpedo levels over the years, I’ve finally found one that doesn’t quit on me. The Klein 935AB4V has become a permanent fixture in my tool bag, and for good reason. That high-vis orange isn’t just for show—when you’re working in dim mechanical rooms or crawl spaces, you can actually spot this thing without playing hide-and-seek with your gear. The magnetic track grabs onto ductwork and conduit like it means business, freeing up both hands when you need them most. What really sold me are those four vial options (0/30/45/90 degrees). Whether I’m checking drain lines or setting up complex duct runs, I’ve got the angle I need without switching tools. The V-groove is clutch for pipe work too. It’s built tough enough to handle real jobsite abuse, and at six inches, it fits perfectly where larger levels won’t.

  • Klein Tools 70550: The Hex Set I Actually Carry

    BySteve

    Look, I’ve bought plenty of hex sets that ended up living in my bottom drawer. The Klein 70550? It’s been on my belt for two years straight.

    What sold me wasn’t the “heavy duty” marketing—it was the first time I folded out that extra-long 5/16″ key and actually reached a blower motor setscrew without pulling the whole unit. The SAE sizing covers about 90% of what I hit on residential calls, and the fold-up design means I’m not fishing loose keys out of my bag while balanced on a ladder.

    These aren’t the cheapest hex wrenches out there, but they’re Klein—which means when I crank down on a seized screw, something’s going to give, and it won’t be the tool. If you run service calls, you need keys you can count on. These are it.

  • Klein 935DGGP: My Go-To Digital Angle Gauge

    BySteve

    After two years of daily use, the Klein 935DGGP has earned its permanent spot in my truck. I’ve tried cheaper angle finders that either lost calibration or couldn’t hold position on ductwork, and I’ve used the pricey options that offer features I’ll never need. This one hits the sweet spot. The magnetic base actually grips—even on painted surfaces—which matters when you’re balancing on a ladder trying to set register angles. What sold me is the quick conversion between degrees and pitch ratios. No more mental math or fumbling with my phone when a customer asks about their roof pitch for condenser placement. It’s accurate, reads clearly in dim attics, and the auto-shutoff saves batteries. Not the cheapest tool out there, but it’s one I actually reach for instead of leaving in the bottom of my bag.

  • Klein 32293 Insulated Screwdriver: My Go-To Tool

    ByMike Izzo

    I’ve been carrying the Klein 32293 in my tool bag for two years now, and it’s become the screwdriver I reach for first on almost every service call. The flip blade design means I’m not juggling two separate tools when I’m cramped inside a furnace cabinet or working overhead on a condensing unit. What really matters in this trade is the insulation rating – it’s tested to 1000V, which gives me peace of mind when I’m working around electrical components. The #2 Phillips and 1/4-inch slotted tips fit terminal screws perfectly, no stripping or slipping. The grip stays comfortable even when my hands are sweaty or greasy. It’s not the cheapest option out there, but Klein builds tools that last. I haven’t had to replace mine yet, and it still feels as solid as day one.

  • Klein Tools 80013: My Go-To Crimping Kit Review

    BySteve

    After twenty years pulling wire in attics and crawl spaces, I’ve learned that most combo tool kits are garbage. The Klein Tools 80013 changed my mind. This two-piece setup pairs an automatic wire stripper with a ratcheting crimper, and both actually work like they’re supposed to. The stripper handles 10-22 AWG without mangling the copper—something I deal with daily on thermostat and control wiring. The ratcheting crimper gives you consistent pressure every time, which means reliable connections on insulated terminals. No more guessing if you squeezed hard enough. I’ve been running this kit for eight months now, and it’s held up through residential installs and commercial service calls. Not the cheapest option out there, but it’s Klein—you’re paying for tools that won’t fail when you’re three jobs deep on a Friday afternoon.

  • Klein D248-9ST: My Go-To Diagonal Cutters Review

    BySteve

    I’ve been running HVAC service calls for over a decade, and I can tell you straight up: most diagonal cutters marketed to our trade are garbage within six months. The Klein D248-9ST changed that for me. These aren’t your typical wire snips — they’re built like ironworker tools because that’s exactly what they are. I started using them after snapping my third pair of “professional grade” cutters on a condensing unit’s wire loom. The high leverage design means I’m not death-gripping every cut, and yes, I’ve actually used them on rebar when retrofit work gets creative. Made in USA matters here because the steel quality is noticeable. At 9 inches, they fit my tool bag without being awkward. Bottom line: these cutters have survived two years of daily abuse and still bite clean. That’s all I need to know.

  • Klein Tools 11048: My Go-To Wire Stripper Review

    BySteve

    After fifteen years turning wrenches in attics and crawl spaces, I’ve learned that your wire stripper either earns its spot in your pouch or it doesn’t. The Klein Tools 11048 has been riding on my belt for three years now, and it’s not going anywhere.

    This thing strips 10-18 AWG solid wire clean every single time—no nicks, no do-overs. I’ve used it on countless thermostat installs, control board replacements, and low-voltage runs. The cutting edges still bite through copper like day one, and the grip hasn’t gone sloppy despite being dropped off more ladders than I’d like to admit.

    Made in USA means something when you’re working in 120-degree attic temps and can’t afford tool failures. It’s not the cheapest stripper out there, but it’s the last one you’ll buy.

  • My Hands-On Review: Klein NCVT-4IR Voltage Tester

    BySteve

    I’ve been running the Klein NCVT-4IR through its paces for the past three months, and this thing has earned a permanent spot in my shirt pocket. What sold me wasn’t the spec sheet—it was that first service call where I traced a dead compressor, checked voltage, and grabbed surface temps on the condenser coil without juggling three different tools. The IR thermometer reads fast and accurate enough for quick diagnostics, and the voltage detection is sensitive without being jumpy like some cheaper pens I’ve tried. Sure, at around $60 it’s not the cheapest tester out there, but when you’re crawling through attics in July or troubleshooting furnaces at midnight, having one reliable tool beats carrying a toolbox. It’s held up to real-world abuse, and that matters more than any feature list.

  • Klein Tools 32516HD: My Go-To Multi-Tool Review

    BySteve

    After fifteen years crawling through attics and wrestling with unit panels, I’ve learned that multi-tools either earn their spot on my belt or get tossed in the drawer. The Klein Tools 32516HD has been riding on my hip for six months now, and it’s not going anywhere.

    What sold me wasn’t the 16-in-1 gimmick – it was the first time I needed to swap from a Phillips #2 to a 5/16″ nut driver while balancing on a ladder. That flip socket design meant I didn’t have to climb down or fumble with loose bits. The magnetic tip actually holds screws, even the tiny ones from electrical covers. And when I needed extra torque on a seized panel screw, the impact-rating proved itself – no stripped tips.

    Is it perfect? No. But it handles about 80% of what I encounter daily, and that’s exactly what I need.